Samsung Dishwasher 9E: Common Causes and Solutions

This error is caused by low water level.

Samsung dishwasher 9e

Some dishes could have flipped horizontally and accumulated water, which can activate the respective sensor. Empty them and resume the cycle. Make sure that the machine is level. If it is not, adjust the feet. Check the water level sensor’s wiring and connections. Fix loose ones and replace damaged wires (if any). If the harness and connections are ok, the water level sensor has to be replaced.

  1. If the water supply is done, but the high- level sensor is not detected, drain the machine and then refill it. If that does not work, there will be the error.
  2. Also, the error will occur if the low-level sensor is detected over 5 seconds.